|
|
| Download Files |
ZEMAX |
| Each new version of ZEMAX includes license codes for all users who have support. Updated license codes will be posted periodically for new keys. If your support has expired, you will not be able to run the latest version of ZEMAX until you renew your support, and the next license code file or update is released. |
We recommend that you archive your update files for future use, or re-installation. |
| File |
Download |
Comments |
ZEMAX,
Oct 12, 2009 |
ZEMAX_2009-10-12_x32.exe |
For 32-bit versions of Windows. |
ZEMAX,
Oct 12, 2009 |
ZEMAX_2009-10-12_x64.exe |
For 64-bit versions of Windows. |
Sentinel Driver
7.5.0 |
Sentinel_Protection
_Installer_7.5.0.exe |
System driver for communication with the hardware key. The driver is usually only needed for first-time installations. To install the driver on new Windows 2000, XP, or NT computers, you must be logged in as administrator. If you have a USB key, do not plug the key into the computer before installing the driver. |
ZEMAX Demo
Version (32Bit) |
ZEMAX_Demo_x32.exe |
For 32-bit versions of Windows. |
ZEMAX Demo
Version (64Bit) |
ZEMAX_Demo_x64.exe |
For 64-bit versions of Windows. |
What's New
In ZEMAX |
What's New.pps
(1.53 MB) |
A PowerPoint Show to describe WHAT'S NEW on ZEMAX |
|
LASCAD |
|
TFCalc |
| File |
Download |
Comments |
TFCalc
Windows demo |
TF_ZIP.exe
(1265 KB)
|
This will download the TF_ZIP.EXE program, which is a self-extracting file. When you run it, it asks you where the files should be stored on your computer. Then it will create the TFCalc_Demo directory on your disk. After the TFCalc demo has been created, you may want to make a shortcut to the TFCALC35.EXE file. |
| TFCalc Manual |
TFCalc Manual.pdf
(520 KB) |
The TFCalc manual (sections 1 and 2 only) is stored as a PDF (Portable Document Format) file, which may be viewed or printed. For best results, this manual should be viewed at 150% magnification or printed. |
TFCalc/WDM
demo |
WDM13.zip
(904 KB) |
This will download the WDM13.ZIP file, which contains:
(1) the TFCalc/WDM application and help files,
(2) a PDF file that describes how the software works, and
(3) files named CONTEST3, CONTEST4, and CONTEST5 which the user can open to see how the program was used to find 3, 4, and 5-cavity WDM designs. |
|
|
